1. Launch the Internet Setup Assitant. (Typically you can find it if you open the Hard Disk and click on the Assistants folder.)
Note: If you can't find it, select File (next to the Apple icon) and select Find. In the find window, do a search for Internet. One of the things it pulls up will be the Apple Internet Setup Assistant. Double click on that.
2. A window like the one below should appear.
3. Click on Update.
4. An introduction window appears. Just click on the right arrow to continue. The "Internet configuration" window appears.
5. Make sure "Add Internet configuration" is selected and click on the right arrow. The "Configuration name" window appears.
6. For the name of the configuration put StarNet.
For connecting to the Internet, make sure that "Modem" is selected.
7. Click on the right arrow. The "Modem Settings" window should appear.
8. In that window set the following:
Port is the modem connected to
Phone line use tone or pulse
9. Click on the right arrow. The "Configuration information" window appears.
10. In that window enter the following:
Login name
Note: Your username was the three to seven character name you selected when you started the account.
Password
11. Click on the right arrow. The "IP Address" window appears.
12. In there, make sure "No" is selected for IP address.
13. Click on the right arrow. The "Domain Name Service" window appears.
14. In that window set the following:
Domain name
15. Click on the right arrow. The "E-mail address" window should appear.
16. In that window enter the following:
E-mail password
17. Click on the right arrow. The "E-mail account" window should appear.
18. In that window, enter the following:
SMTP server
19. Click on the right arrow. The "Newsgroup Host Computer" should appear.
20. For the news server enter news.azstarnet.com
21. Click on the right arrow. The "Conclusion" window should appear with a summary of all the information entered.
22. Click on the right arrow again. Another "Conclusion" window should appear. Uncheck "Connect when finished" and then click on Go Ahead.
23. Then you should be set.